Sage Rio SIX In-line

DOWNLOAD DATA SHEET

GENERAL INFORMATION
STYLE: Integral In-Line Mass Flow Meter
SENSOR: Two reference grade Platinum RTD clad in 316SS (1.4401) sheath
MATERIAL: Wetted metal components: 316SS
POWER: 24VDC Standard (115/230VAC optional)
POWER DISSIPATION:
ELECTRONICS: Microprocessor based (Hybrid-Digital)
DISPLAY: High contrast photo-emissive OLED graphical display (Flow Rate, Totalizer, Temperature)
TURNDOWN: 100 to 1
RESOLUTION: 1000 to 1
LOW END SENSITIVITY: 25 mm/sec (5 SFPM)
FIELD CALIBRATION CHECK: Yes – Digital system allows raw signal validation in milliwatts (In-Situ Calibration Check)
COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
APPROVALS: UL, cUL Class I Division 1, Groups B, C, D ATEX Zone I
APPROVALS: ATEX Zone 1 ex II 2 G Ex d IIB+H2 T6 Gb
FIELD RECONFIGURABLE: Optional with Sage ADDRESSER
FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
FLOW REPEATABILITY: 0.2%
RESPONSE TIME: 1 second time constant
GAS TEMPERATURE RANGE: Standard -40° to 200°F (93°C), Optional to 300°F (149°C) and 450°F (232°C)
GAS PRESSURE: 34 Bar (500 PSIG) (If higher pressure needed, contact Sage)
FLOW OUTPUT: 4 to 20 mA for Rate
TOTALIZER: 24VDC pulse for Totalizer value
TEMPERATURE: On Display/Output with Modbus®
AMBIENT TEMPERATURE: -40° to 122°F (50°C) for ATEX Rating
FLOW BODY: 316SS (1.4401) Schedule 40 Flow Bodies sized from 6.4mm (1/4″) to 100mm (4″).
Male NPT ends standard (Flanges and other options available)
FLOW CONDITIONING: Flow Conditioners are built in to In-Line Style Flow Bodies from 13mm (1/2″) to 100mm (4″)
NOTES: The unit is not provided with an ATEX approved cord grip
Sage
This entry was posted in . Bookmark the permalink.