Sage Rio SIX Insertion

DOWNLOAD DATA SHEET

GENERAL INFORMATION
STYLE: Integral Insertion Mass Flow Meter
SENSOR: Two reference grade platinum RTD clad in 316SS (1.4401) sheath
MATERIAL: Wetted metal components: 316SS
POWER: 24VDC Standard (115/230VAC optional)
POWER DISSIPATION:
ELECTRONICS: Microprocessor based (Hybrid-Digital)
DISPLAY: High contrast photo-emissive OLED graphical display (Flow Rate, Totalizer, Temperature)
TURNDOWN: 100 to 1
RESOLUTION: 1000 to 1
LOW END SENSITIVITY: 25 mm/sec (5 SFPM)
FIELD CALIBRATION CHECK: Yes – Digital system allows raw signal validation in milliwatts (In-Situ Calibration Check)
COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
APPROVALS: UL, cUL Class I Division 1, Groups B, C, D
APPROVALS: ATEX Zone 1 ex II 2 G Ex d IIB+H2 T6 Gb
FIELD RECONFIGURABLE: Optional with Sage ADDRESSER
FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
FLOW REPEATABILITY: 0.2%
RESPONSE TIME: 1 second time constant
GAS TEMPERATURE RANGE: Standard -40° to 200°F (93°C), Optional to 300°F (149°C) and 450°F (232°C)
GAS PRESSURE: 34 Bar (500 PSIG) (If higher pressure needed, contact Sage)
FLOW OUTPUT: 4 to 20 mA for Rate
TOTALIZER: 24VDC pulse for Totalized value
TEMPERATURE: On Display/Output with Modbus®
AMBIENT TEMPERATURE: -40° to 122°F (50°C) for ATEX Rating
PROBE STYLE / LENGTH: 12.7mm (1/2″) OD Probe Lengths 152mm (6″) to 914mm (36″)
FLOW CONDITIONING: Captive Flow Conditioners available upon request with meter purchase
NOTES: The unit is not provided with an ATEX approved cord grip
This entry was posted in . Bookmark the permalink.