DOWNLOAD DATA SHEET

General Information
STYLE: Remote Inline Mass Flow Meter
SENSOR: Two reference-grade platinum RTD clad in 316SS sheath
MATERIAL: Wetted metal components: 316SS
POWER: 24VDC Standard (12VDC or 115/230VAC optional)
POWER DISSIPATION: < 2.5 w
ELECTRONICS: Remote-Style Microprocessor-based (Hybrid-Digital)
ELECTRONICS ENCLOSURE: Junction Box is Explosion Proof, Class I, Div 2, Groups B, C, D (no electronics)
TRANSMITTER ENCLOSURE: Remote mount, NEMA 4 enclosure
DISPLAY: High contrast photo-emissive OLED graphical display (Flow rate, Totalizer, Temperature)
TURNDOWN: 100 to 1
RESOLUTION: 1000 to 1
LOW-END SENSITIVITY: 5 SFPM
FIELD CALIBRATION CHECK: Yes – Digital system allows raw signal validation (milli-watts)
COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
APPROVALS: Class I, Div, 2 Groups B, C, D T4. (24 VDC). ANSI/ISA 12.12.01, CSA 2202; ATEXnA – Div 2 (24 VDC)
FIELD RECONFIGURABLE: SageCom required
FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
FLOW REPEATABILITY: 0.2%
RESPONSE TIME: 1 second time constant
GAS TEMPERATURE RANGE: -Standard -40 ° TO 200 °F (93 °C) Optional to 300 °F (149 °C) and 450°F (232 °C)
GAS PRESSURE: 500 PSIG (if higher pressure needed, contact Sage)
FLOW OUTPUT: 4 to 20 mA for Rate
TOTALIZER:  24VDC pulse for Totalized value
TEMPERATURE OUTPUT: Through Modbus® only
AMBIENT TEMPERATURE: -40 ° TO 150 °F (66 °C)
FLOW BODY: 316SS Schedule 40 Flow Bodies sized from 1/4″ x 6″ long to 4″ x 12″ long.
Male NPT ends standard (Flanges and other options available)
CABLE LENGTH: 25′ Standard (max length 1000′)
RELAYS: N/A
FLOW CONDITIONING: Flow Conditioners are built into Inline-Style Flow Bodies from 1/2″ to 4″
ENCLOSURE DEPTH: DC: 4.35″ AC: 5.35″
This entry was posted in . Bookmark the permalink.